激光熔覆Ni基SiC合金涂层组织与性能的研究

利用5kWCO2连续波激光器在16Mn钢基材表面对含20%(体积比)SiC陶瓷粉末的镍基自熔性合金粉末进行激光熔覆得到Ni基SiC合金涂层(NiSiC)。研究了合金涂层的组织形貌及相结构,并用单纯的镍基合金涂层(Ni60)进行了显微硬度及滑动磨损性能的对比试验。结果表明,NiSiC合金涂层由γ枝晶及其间的共晶组织组成,主要组成相为γ-Ni,γ-(Ni,Fe)固溶体和(Cr,Fe)7C3,Cr23C6及(Cr,Si)3Ni3Si等化合物。添加SiC的镍基合金涂层NiSiC比单纯的镍基合金涂层Ni60具有较高的硬度和耐磨性。     

Si基膜片型气敏传感器微结构单元的热学性能

微结构气敏传感器由于其微型化、低功耗、易阵列化和易批量生产等优点而受到国内外研究者的广泛关注。利用微机电系统（MEMS）加工技术，制备Si基膜片型微结构单元，并分析其热学性能。这种单元工作区温度为-300℃时，加热功率约75mW；并且膜片工作区的热质量很小，温度可以于毫秒量级的时间内，在室温和450℃之间调制。利用这种微结构单元，可以在温度调制方式下，研究气敏薄膜的电学特性和敏感机理。     

TiAl基合金板材制备技术的发展现状

综述了TiAl基合金板材制备技术的发展现状。介绍了的制备TiAl基合金板材三种技术的工艺过程及制得的TiAl基合金板材的显微组织和力学性能。     

Immobilization and activation of vanadium(III) and titanium(III) single‐site catalysts for ethylene polymerization using MgCl2‐based supports

Significant increases in the activity of vanadium(III) amidinate catalysts for ethylene polymerization have been obtained by immobilization on a MgCl₂‐based support prepared by reaction of AlEt₃ with a MgCl₂/ethanol adduct. Catalyst immobilization and activation on this type of support prevents the rapid decay in activity observed under homogeneous polymerization conditions with unsupported catalysts. Stable polymerization activity is also observed with analogous titanium(III) complexes. Polyethylene with narrow molecular weight distribution and spherical particle morphology is obtained without reactor fouling. Copyright © 2005 Society of Chemical Industry     

A flexible architecture for distributed knowledge based systems with nomadic access through handheld devices

Nowadays any Knowledge Based System (KBS) realization needs of intercommunication among distributed components and to use non-connected and distributed data sources, which poses several challenges to the classical Artificial Intelligence field of KBS.

The multiagent paradigm and the use of ontologies are considered to be suitable tools to face the problems of designing and developing today KBS. On the other hand, using such networked KBS through handheld devices makes more efficient exploitation and interaction with the system.

This paper presents an open and flexible architecture for a distributed KBS and an application of it to construct a system for Psychological Disorders consulting, the so called PDA² (Psychological Disorder Assistant through PDA). We analyze the main features of the architecture as well as the agent tools we may use to construct it. Additionally, we present a support ontology for Psychological Disorders.     

抗窄带干扰宽带中频数字接收机的设计与实现

讨论了存在强干扰条件下MSK中频数字接收机的频域窄带干扰抑制、伪码快速捕获、MSK相干解调等实现方法。具体实现中提出了基于功率估计的码捕获门限实时调整方案，解决了动态干扰条件下的快速码捕获问题。基于FPGA DSP硬件设计和软件可编程数字信号处理算法，接收机具有较强的适应性和稳定性。     

A note on the variance of rank-based selection strategies for genetic algorithms and genetic programming

This paper evaluates different forms of rank-based selection that are used with genetic algorithms and genetic programming. Many types of rank based selection have exactly the same expected value in terms of the sampling rate allocated to each member of the population. However, the variance associated with that sampling rate can vary depending on how selection is implemented. We examine two forms of tournament selection and compare these to linear rank-based selection using an explicit formula. Because selective pressure has a direct impact on population diversity, we also examine the interaction between selective pressure and different mutation strategies.     

TiAl基合金表面改性对高温抗氧化性的影响

研究了渗碳处理ＴｉＡｌ基合金试样的高温氧化行为，发现渗碳处理可以在ＴｉＡｌ基合金试样表层形成致密的多层结构的渗碳层，并发生表层Ａｌ、Ｔｉ重新分配。致密的渗碳层具有良好的高温抗氧化性和高温热稳定性，同时，Ｔｉ、Ａｌ重新分配形成的富Ａｌ最外层也能进一步提高合金的抗氧化性。     

Kelogg合成氨工艺进展

综述了以先进合成氨工艺和转化换热系统技术为代表的Ｋｅｌｏｇｇ第二代合成氨工艺。较详细介绍了钌基催化剂和转化换热器     

Data compression and encryption using cellular automata transforms

A family of basis functions, generated from the evolving states of Cellular Automata (CA), is used to compress and encrypt data. The operations required in encoding and decoding the data are described under the umbrella Cellular Automata Transforms (CAT). There is a huge number of these transform bases. CAT can be used in the way other mathematical transforms (e.g., Fourier, Discrete Cosine, Laplace, Wavelet, etc.) are utilized. In data-compression applications, the rules and pertinent keys used to generate the CA are selected to favor those that yield basis functions with the best information-packing characteristics. On the other hand, for encryption the selection is biased towards those with the tendency to yield an avalanche effect. In the latter case the transform process must be error-free.